The yoyo involves more physics than someone would have ever thought. The simple motion made by the yoyo up and down represents one of the most complex toys in terms of phenomenons. Let me present you how a yoyo works when you throw and get it back to your hand.

## Basic principles of how the yoyo works

When you hold a yoyo it has potential energy. Any thing that is above the ground has potential energy because it can do something. As the yoyo goes down the potential energy given by the height transforms In kinetic energy, the energy of movement.

The photo was taken while the yoyo was moving. That’s why it is blurry.

When you let a yoyo go down, gravity affects the center of mass of the yoyo to pull the yoyo downward. The string of the toy is wrapped around the axle and the string is attached to the finger. As a result, the yoyo is forced to rotate as it drops.

The rate of drop increases in time, so the rotation rate of the yoyo. The greatest values are when the bottom of the string is reached and the string is unwound.

When the yoyo reaches the end of the string it no longer has potential energy but kinetic energy .as the yoyo goes up when you tug it the yoyo gains potential energy and loses kinetic energy(converted back into potential energy due to inertia). The exchange of energies is similar to a rollercoaster car.

A regular wooden yoyo or other beginner yoyo falls harder than a stone attached to a string because the yoyo also has to spin at the same time.

The yoyo has potential energy(from the height you throw the toy), the kinetic energy of movement(from up to down) and rotational kinetic energy(the yoyo spins).

These energies change their values depending on the position and spin of the yoyo(if you tug it or throw it if the yoyo spins or not).

If there was no friction, the yoyo would just climb back at the same level it started from. Unfortunately, this is not the case, so we have:

• the friction between the axle
• the string and the friction between the string and response system of the yoyo
• Not only that, but there also is the air resistance that slows down the yoyo.

To have more energy into the system you need to tug the yoyo for it to gain potential energy/you need to throw the yoyo for more kinetic energy.

As the yoyo goes up the angular momentum of the yoyo is transformed into gravitational potential energy corresponding to the height the toy is positioned. The angular momentum decreases as the yoyo goes closer to your hand. This is the reverse of the process when the yoyo was thrown or let going down.

The yoyos can be thrown horizontally, launched or thrown in other strange directions. The principle is similar, just the kinetic energy results from the hand movement and not from gravity. The kinetic energy is represented by the spin of the yoyo in air.

The yoyo feels unique because it has that specific momentum. Momentum is when a mass is in motion, it measures how much is something in motion. The yoyo has momentum because it has both mass and velocity.

There are two kinds of momentum, just like the motions the yoyo does:

• linear momentum(goes up and down on the string)
• angular momentum(because it spins).All spinning objects have angular momentum and try to keep spinning in the same direction and plane(just try to spin a bike wheel and try to deviate the plane of rotation-see how it goes).

A gyroscope is the perfect example of strange behaviour. You can barely modify the plane of rotation. If you try to tilt it, it will tilt the other direction.

The gyroscope is so stable due to the angular momentum that will be even suspended on a string(the string will hold the gyroscope). This phenomenon illustrates the conservation of angular momentum as the physicists say. That’s why you feel a yoyo strangely stable as you do tricks with it and you still have the yoyo spinning on the same plane.

If the yoyo string is attached securely to the axle, as the old Pedro Flores yoyos, the wooden axle will grip the string and the yoyo will start to wind up. The yoyo will return to the hand. The yoyo player should give a slight tug on the string as the yoyo winds back to the palm for compensating the energy lost for friction.

In modern yoyos, you have bearings that don’t have that much friction as a wooden axle since you only have the interior balls having friction. The ball bearing yoyos don’t return as fast as the wooden yoyos. Just fling harder the wrist and the toy will return to your hand. The tug increases the friction between the string and the axle so the yoyo rewinds and come back up. That is for responsive yoyos. About unresponsive yoyos, I’ll talk a bit later.

## Yomega Brain Clutch system working

This yoyo represented an innovation in the ’90s when it first appeared on the market as it could return to your hands automatically when the yoyo lost too much spin.

The auto-return system just represents a centrifugal clutch. The system consists of two springs and two plastic components, each one attached to a spring.

Yomega Brain Clutch system

To make the yoyo spin freely, you need to throw it hard. When you throw the yoyo hard, the spin of the yoyo will create the centrifugal force that will push the plastic components gripping the plastic bearing.

The pieces are pushed outwards by the centrifugal force, thus compressing the springs. The plastic parts don’t grip the bearing anymore like brakes so the yoyo can spin freely. When the yoyo slows down, the springs push back again against the parts holding the bearing.

This makes the white parts to rub against the bearing and to stop the yoyo from spinning at the end of the string. The yoyo won’t stop though. The momentum of the yoyo will transform from rotational momentum to linear momentum,  thus making the toy come back up.

## How binds work for an unresponsive yoyo

Unresponsive yoyos are specifically made for not returning to your hand when you fling your wrist and tug the toy. This aspect revolutionized yo-yoing, allowing for more tricks to be done, but also posed a challenge for the first players who had to make the yoyo return the yoyo somehow.

The first ideas of bind were inspired by 4A tricks. The main idea is to whip the string around the axle of the offstring yoyo and the string should wrap around the bearing to create friction and engage the response system.

Just have an idea of it by watching this video by Mr Yoyo Thrower.

Unfortunately, those didn’t work so well for string tricks yoyos, but the windup principle was still there. The thing that completely changed the return of the yoyo was the string loop.

Let me explain to you:

Let’s say you get in a front mount. You are right-handed and hold the knot on your right middle finger. You have a string loop coming over your non-throw hand pointing finger. When you bind you to feed the loop of string into the bearing. This string wraps around the axle engages the response system and the yoyo winds up.

CT-Center Track Bearing

The yoyo bearing has two tracks for balls: exterior and interior. The exterior track is connected to the outside of the bearing that holds the string. The interior track is attached to the inner part of the bearing. The outside part and the interior part spin independently from one another.

When the string from the loop goes around the bearing it makes the latter(the exterior part of the bearing) move along with the interior part of the bearing which is fixed to the yoyo.

To be more clear the bearing spins in the same direction as the yoyo. As these things happen. The string rubs the silicone response system

.The silicone pads grab the string more and the yoyo eats up more string. As the yoyo has more string winding up the inertia of the toy will make it climb the string and make it return to the hand.

The bind depends on the direction of spin of the yoyo. For example, if you throw the yoyo in the front, the yoyo will spin forwards, you need to bind in the front of the spin. The loop will be the farthest from you. If you spin the yoyo backwards, the loop will be the closest to you, but in front of the spin of the yoyo.

## Conclusion

The yoyos remain one of the most complicated toys in terms of physics as many elements are involved in yoyo play. The already fascinating toy in the 19 hundreds is even cooler now with the clutch system and unresponsive bearings. The yoyos deserve to remain in the hands of children or adults, for play but also for the physics involved.

Categories: Yoyo recommendations

#### Sebastian

He is passioned about yoyoing and technology .Enjoys dreaming about the multiple possibilities the internet offers to share the knowledge gathered in 2 years of experience within the skill toys world.Wordpress comes in handy for achieving this dream and for materializing his vision.